Drag to orbit • Scroll to zoom
About This Fence Hook 3D Print Builder
The tool lets you parametrize key dimensions so your Fence Hook 3D Print locks in securely and carries the load you need.
Choose inside/outside fence fit, arm offset, notch depth, and optional safety lips for brooms, cords, or garden tools.
- Fully parametric: size, thickness, radius, and hook style
- Outdoor-ready options: PETG/ASA presets & UV notes
- Strength-first geometry: fillets and generous perimeters
- Instant STL export: download and print in minutes
Printing Tips for Your Fence Hook 3D Print
- Orientation: Print the hook upright so the load pulls across lines, not between layers.
- Perimeters: Use 3–4 walls (more for heavy loads) to reinforce the arms.
- Infill: 40–60% grid/gyroid balances strength and time; go higher for heavier items.
- Layer Height: 0.2 mm is a good default; 0.28 mm for fast, 0.16–0.2 mm for strong/clean parts.
- Supports: Usually not required; enable only for steep overhang variants.
- Materials: PLA+ is fine indoors; PETG, ABS/ASA recommended for outdoor/UV exposure.
- Bed Adhesion: Use a brim if tall/skinny variants show corner lift.
- Post-Processing: Light edge deburring improves comfort and reduces snagging.
Common Uses
- Fence planters, lanterns, and décor
- Garage tool storage (rakes, brooms, cords)
- Shed organization (hoses, ropes, extension cables)
- Patio accessories (string lights, towels)
Key Features
- Edge Radius & Fillets: reduce stress risers for a stronger Fence Hook 3D Print.
- Notch & Lip Controls: prevent items from slipping off.
- Mounting Hole (optional): add a screw/zip-tie anchor for security.
- Preset Profiles: indoor light-duty and outdoor heavy-duty one-click setups.
FAQ
What material is best for outdoor use?
PETG or ASA for UV resistance and temperature stability. PLA may deform in heat/sun.
How much weight can the hook hold?
Depends on dimensions, material, slicer settings, and fence mounting. For heavier loads, increase perimeters, infill, and thickness.
Do I need supports?
Most variants are support-free. Only enable supports if your chosen hook has steep overhangs.
Start Your Build
Ready to design? Set your dimensions, preview, and export your STL.
